How to Use:
Never run your lights before peeling the protective plastic layer on the reflector off.
Just plug the lamp into the reflector and the reflector into the ballast and you’re ready to go! Use a contactor to control the on/off switching of the light fixture to be safe from an electrical standpoint.
We recommend replacing your bulbs in 4 – 6 month intervals or once every complete cycle to keep output as high as possible – making yields more consistent across cycles.
We recommend mounting your ballast outside your room – place them above waist level to reduce the chances of moisture getting near the units. If you’re sitting them in your room place them on wooden blocks or bricks to allow some air movement around the unit.
Suspend your light with a pair of Ratchet hangers